Fire Sense 55006 Bedienerhandbuch PDF herunterladen (Seite 12)

Step 10

Put the cylinder on the base, and into the fixed

cylinder round.

bolts and tighten it in order to prevent the cylinder

from moving.

Warning:

The cylinder used must include a collar to protect

the cylinder valve.

Do not store a spare LP Gas cylinder under or near

this appliance.

Never fill the cylinder beyond 80 percent full.

For appliances designed to use a CGA No.791

connection: Place the dust cap on the cylinder valve

outlet whenever the cylinder is not in use. Only

install the type of dust cap on the cylinder valve that

is provided with the cylinder valve. Other types of

caps or plugs may result in leakage of propane.

Note:

Gas supply pressure: 25 to 250PSI

Step 11

Check for leaks

Your patio

heater has been checked at the factory

for all possible connection leaks. To check the

connection of the gas hose / regulator /cylinder:

1. Make leak solution by mixing 1 part liquid dish

soap and 3 parts water.

2. Spoon several drops(or use quirt bottle) of the

solution onto the gas hose /regulator and regulator

/cylinder connection.

3. Inspect the connections and look for bubbles.

4. If no bubbles appear, the connection is safe.

5. If bubbles appear, there is a leak. Loosen and

re-tighten this connection.

6. If leak continues, call a qualified service person.

7. Use of Teflon(plumber’s)tape on threads of

gas

connections is recommended.

ASSEMBLY

Attach the cylinder to the base with 3pcs M8x12

Step 10

Step 11

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Fire Sense 55006 Bedienerhandbuch Seite 12